Instructions for Lookout I, II and My Buddy model Dog Car Seats
Step 1: Connect the included seat belt strap to your vehicle's lap portion of the seat belt. It has a quick-connector, so it can be installed and removed easily.

Step 2: Put your seat belt through the back slot of the car seat, so that the lap portion of the seat belt - which has the connecting seat belt strap - is now located inside the back of the dog car seat. Pull your seat belt through the other slot of the dog car seat and fasten in your vehicle. Your dog car seat is now securely attached in your car seat. 

Step 3: The car seat strap has a metal quick connector on the end that can now be attached to your pet's harness D-ring. The strap is adjustable, so you can now make the strap longer or shorter depending on your preference. It is always a good idea to not allow too much slack in the strap, so your dog remains securely in place inside the car seat at all times. Always use a harness with your dog car seat and NEVER attach straps to your dog's collar.

Lookout Perch
Much like the regular lookout dog car seats, the Perch used your vehicle's lap belt to secure it. The back quilted fabric has an elastic strap sewn into it that allows you to put it over your seat's head rest. Remember that the HALF bench can be used in both your front and back seat,  while the FULL bench is so large that it will only work in your back seat.

Step 1: Two connecting straps are sewn into the perch seat. Both have  quick connectors, so you can install and remove the perch quickly. Put your perch on the car seat, move your car seat belt lap portion through the connecting straps of the perch.

Step 2: Fasten your car seat belt to your vehicle at this point and your perch is now secure.

Step 3: Install the included seat belt strap on to the lap portion of your car seat belt, and use the quick connector on the end of the strap to secure it to your dog's harness D-ring. Always use a harness with your car seat and NEVER attach straps to your dogs collar.

Standard and Deluxe Booster Seats
This seat does not use your vehicle's seat belt system to secure it to your car and requires some minor assembly before using.  The booster car seat has a built-in strap which connects to your dog's harness.

Step 1: Fasten the shorter of the two included straps to one D-ring on the top back edge of the booster seat. Loop this strap around the top of your car seat head rest and connect to the outer D-ring of the other side of the booster seat. You can change the height of your booster seat by adjusting this strap.

Step 2: Use the longer of two included straps to connect to the D-ring on the lower back support of the booster seat. Loop this strap around your vehicle's car seat and connect it to the D-ring on the opposite side. You can tighten this strap to secure it to the car seat.

Step 3: There is a sewn-in strap on the booster seat that connects quickly to your dog's harness. Always use a harness with your car seat and NEVER attach straps to your dogs collar.

Note: You can also use the booster seat in the rear seat provided your rear seat has a head-rest installed. You would only have to use Steps 1 and 3 above and not use the longer strap as described in step 2.